Elevate your industrial operations with ASW—home to American-engineered heavy-lift UAVs built to power your toughest challenges.
ILM 3 – Assembly
- v1.1
- 05/31/2022 by Daniel Neal
- Steps (8)
- Time Required (00:05:00 - 00:10:00)
- Difficulty (Easy)
- Tools Required (3/16 Ball Driver, 3/32 Ball Driver)
Step 1
Mounting the Arms and Landing Gear
Use the provided 3/16 Ball Driver to secure arm mount screws (2 per arm)
Use the provided 3/32 Ball Driver to secure the landing gear tube to the landing gear mount
Click or Tap to expand images
Step 2
Arm Terminals
Securely connect the arm terminals to the frame side terminals
Ensure that the red safety clip is inserted
- Note: the safety clip will connect between the red and black terminals
Click or Tap to expand images
Step 3
Main Battery
Secure the main battery into the battery tray using the attached Velcro straps
- Do not power on the plane at this step!
Step 4
Aircraft C2 Antenna
- Check C2 antennas
- Check that each antenna is securely fastened
Step 5
Motors
Ensure that the motors spin freely by hand
Check each lower motor mount screw for blue torque indicator (torque indicator should be intact with no cracking)
Step 6
Propeller Direction
- Ensure that the propeller blade direction matches the arm root
Clockwise propellers will have the one-tab pointing to the right
Counterclockwise propellers will have the one-tab pointing to the left
Step 7
Frame
Check the integrity of torque indicator for any fastener on the drone on which indicator came installed
Step 8
Payload
Customer specific
Ensure that your payload (if applicable) is safe for flight
